Six inch (6″) indoor and outdoor Red Fire Alarm Belll, includes the back box for mounting. Featuring corrosion resistant red enamel finish, a heavy steel gong, and an easy to install 4 wire design,
Red Fire Alarm Bell
- Fire Bell 10″ 120 Volt AC (UL)
- Often used as a school bell, or in hotels, our fire alarm bells have been in service for 30 years.
- Back Box sold separately. Be sure to choose the alarm bell with the correct voltage.
- Indoor and outdoor installation. Argco is the bell store for professionals.
- Rated Current: 25mA – Sound Level: 95 dB
Category: FIRE ALARM SYSTEMS
Only logged in customers who have purchased this product may leave a review.
- Zero maintenance cost
- Crack free body
Asenware 4 Zone Fire Alarm Control Panel AW-CFP2166-4
|Mains supply voltage||110VAC or 220VAC|
|Internal power supply||27.2VDC|
|Total output current limited||3A @ 220VAC|
|Batteries (default configuration)||12V2.3AH*2|
|Number of circuit||12-32|
|End of Line device||6.8k Ω,5% tolerance, 0.5-1W (colour code-blue,grey,red,gold)|
|Call point resistor value||470 to 680 Ω, 0.5 or 1 watt|
|Number of general circuits||2|
|Outputs fused AT||600mA|
|Maximum number of bells @ 50mA of each Sounder output||30|
|Battery fuse||1.85A resettable fuse|
|Sounder outputs||750mA resettable fuse|
|Output type||NC and NO relay|
|Largest acceptable conductor size||2.5mm2|
|Smallest acceptable conductor size||0.75mm2|
|Weight (with batteries)||13kg|
There are no reviews yet.