FR1300 is an indoor slave reader with RS485 interface that works with master controllers from ZKTeco, for example, inBIO series biometric control panels. As a value-added slave reader, FR1300 provides the most secure and cost effective access control solution for small and medium enterprises.
Sale
ZKTECO FR1300
$214.00
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
Close
Hikvision DS-K1107MK Mifare Reader & Keypad
Hikvision DS-K1107MK Mifare Reader & Keypad
- Equipped with the 32-bit high-speed processor
- RS-485 and Wiegand (W26/W34) protocol
- Build-in Mifare card reading module (Frequency: 13.56MHz). Meets the standard of ISO 14443-A. Supports reading Mifare card No
- Supports tampering alarm
- Built-in buzzer for identifying the reading status
- Online upgrade function
- Watchdog design for repairing itself in case that exception occurs, to ensure the long service life of the reader
| Power Supply | 12V DC |
| Power Consumption | ≤2W |
| Processor | 32-bit |
| Reading Range | ≤50mm (≤1.97″) |
| ID Settings | via DIP Switch |
| Communication Interface | RS-485/Wiegand (Set via DIP Switch) |
| Audio Alert | Beeper |
| Keypad | Keypad with 12 Keys (0~9, *, #) |
| LED Indicator | Power Indicator, Status Indicator |
| Working Temperature | -20°C to +65°C (-4°F to 149°F) |
| Working Humidity | 10% to 90% (Non Condensing) |
| Dimensions | 115mm × 44mm × 22mm (4.53” × 1.73” × 0.87”) |
| Tamper Alarm | Support |
| Protection Level | IP65 |
| Installing Method | Wall Mounting with Screws; Do Not Support Gang Box |
Close
Hikvision DS-K1T606 Face Recognition Terminal
Features
- Wall mounting
- 5-inch LCD touchscreen to display operation interface, advertisement, etc.
- 2 MP wide-angle lens
- WDR
- Face recognition distance: 0.3 m to 1 m
- High-performance processor with a deep learning algorithm
- Max. 3000 face pictures and Max. 5000 fingerprints Note: Only the device containing fingerprint module supports fingerprint related functions.
- Multiple authentication modes: authentication by comparing face picture, by swiping card and comparing face picture, by custom mode, etc.
- Accurate and fast face recognition function. The face recognition duration is no more than 1s per person and the face recognition accuracy rate is more than 99%
- Applies face picture data and card data to the device via TCP/IP or uploading them to the device via the USB flash drive
- Stand-alone operation
| SYSTEM PARAMETERS | ||
|---|---|---|
| 1:N Face Recognition Duration: | ≤ 1 s/Person | |
| Operation System: | Linux | |
| Fingerprint Module: | Optical, Red Backlight | |
| Card Capacity: | 5,000 | |
| Face Recognition Accuracy Rate: | ≥ 99% | |
| Card Type: | Mifare Card | |
| Camera: | 2 MP; WDR; Wide-Angle Lens | |
| Fingerprint Capacity: | 5,000 | |
| Event Capacity: | 100,000 | |
| Face Recognition Distance: | 0.3 m to 1 m | |
| Face Capacity: | 3,200 | |
| DEVICE INTERFACES | ||
|---|---|---|
| Communication Mode: | Ethernet 10/100Mbps Self-adaptive; Wi-Fi | |
| Output Interface: | Doorbell × 1, Lock × 1, Alarm Output × 1 | |
| Input Interface: | RS-485 × 1, Wiegand × 1, USB × 1, Exit Button × 1, Tamper × 1 , Alarm Input × 2 | |
| GENERAL | ||
|---|---|---|
| LCD Screen: | 5-inch LCD Touch Screen; Resolution: 480 × 800 | |
| Power Supply: | 12 VDC/2 A (Centralized Power Supply) | |
| Protection Level: | IP 65 Water-Proof | |
| Installation: | Wall Mounting with/without Gang Box | |
| Application Situation: | Indoor; Outdoor | |
| Working Humidity: | 10% to 90% (Non-Condensing) | |
| Working Temperature : | -20°C to +50°C (-4°F to 122°F) | |
| Dimensions (L×W×H): | 281.5mm × 113mm × 45mm (11.08” × 4.45” × 1.77″) | |
Close
DS-K1201MF Card Reader
DS-K1201MF Card Reader
The Hikvision DS-K1201MF fingerprint & card Reader is powered by a 32-bit high-speed processor. It communicates with the access controller via the RS-485 protocol. A built-in tamper-resistant module helps protect the card reader from malicious damage and an IP65 protection level makes the DS-K1201MF suited for outdoor installation.
ZKTeco K40 Fingerprint Time attendance and Access control
Fingerprint Capacity 1000 (2000 without SSR ) ID Card Capacity 1000 (Optional) Record Capacity 80,000 Display 2.8-inch TFT Screen Communication
Close
Hikvision DS-KD8102-v Video Intercom D Series Water Proof Door Station
| SYSTEM PARAMETERS | ||
|---|---|---|
| Processor: | | | High-Performance Embedded SOC Processor |
| Operation System: | | | Embedded Linux Operation System |
| VIDEO PARAMETERS | ||
| Camera: | | | CMOS Low Illumination 1.3 MP HD Colorful Camera |
| Video Compression Standard: | | | H.264 |
| Resolution: | | | 1280 x 720 |
| Video frame rate: | | | PAL: 25 fps, NTSC: 30 fps |
| DISPLAY PARAMETERS | ||
| Display Screen: | | | 3.5-Inch Colorful TFT LCD |
| Display Resolution: | | | 480 × 320 |
| Operation Method: | | | Capacitive Touch Keypad |
| Operation interface: | | | LCD Display, Easy Menu |
| AUDIO PARAMETERS | ||
| Audio Input: | | | Built-in Omnidirectional Microphone |
| Audio Output: | | | Built-in Loudspeaker |
| Audio Compression Standard: | | | G.711 U |
| Audio Compression Rate: | | | 64 Kbps |
| Audio Quality: | | | Noise Suppression and Echo Cancellation |
| NETWORK PARAMETERS | ||
| Ethernet: | | | 10/100/1000 Mbps Self-Adaptive Ethernet |
| Network Protocol: | | | TCP/IP, RTSP |
| ACCESS CONTROL PARAMETERS | ||
| Internal Card Reader: | | | Built-in IC Card Reader |
| External Card Reader: | | | Wiegand 26, Wiegand 34, or RS-485 IC Reader |
| Door Magnetic Detection: | | | Detects Door Magnetic Status |
| IR HUMAN DETECTION | ||
| Approaching Detection: | | | Supporting IR Detection, Vertical Distance: from 60 cm to 80 cm |
| LIGHT SUPPLEMENT | ||
| Light Supplement Mode: | | | Visible Light Supplement |
| ALARM PARAMETERS | ||
| Alarm Input: | | | Door Magnetic Alarm, Tampering Alarm |
| DEVICE INTERFACES | ||
| Network Interface: | | | 1 RJ-45 10/100/1000 Mbps Self-Adaptive Ethernet Interface |
| RS-485: | | | 1 RS-485 Half-Duplex Port |
| I/O Input: | | | 8 |
| I/O Output: | | | 4 |
| Wiegand: | | | 1 Wiegand Port for Accessing Wiegand IC Card Reader |
| USB : | | | 1 USB 2.0, Supporting U-Disk |
| GENERAL | ||
| Material: | | | Plastic |
| Power Supply: | | | 12 VDC |
| Power Consumption: | | | ≤15 W |
| Working Temperature: | | | -40° C to 70° C (-40° F to 158° F) |
| Working Humidity: | | | 10% to 90% |
| IP Protection Level: | | | IP65 |
| Dimensions(L × W × H): | | | 418 mm × 145 mm × 61 mm (16.5″ × 5.7″ × 2.4″) |
| Certification: | | | FCC, IC, CE, C-TICK, ROHS, REACH, WEEE |
Close
Hikvision DS-K1108MK Mifare Card Reader with Keypad
Hikvision DS-K1108MK Mifare Card Reader with Keypad
- 32-bit high-speed processor
- Support RS485 and Wiegand(w26, w34) protocol
- Build-in Mifare card reading module (Frequency: 13.56MHz). Meets the standard of ISO 14443-A.
- Supports reading Mifare card No
- Tamper-proof function
- Build-in buzzer for status indication
- Online upgrading
- Accurate data and time display provided by built-in electronic clock and watchdog program to ensure the basic function of the terminal
| Power Supply | DC 12V |
| Power Consumption | ≤2W |
| Processor | 32bit |
| Radio Frequency Standard | ISO 14443-A |
| Induction Distance | ≤50mm (≤1.97″) |
| ID Settings | via DIP Switch |
| Communication Mode | RS485/Wiegand (Set via DIP Switch) |
| Prompt | Buzzer |
| Keypad | Keypad with 12 Keys (0~9, *, #) |
| LED Indicator | Power/Status |
| Working Temperature | -20°C to +65°C (-4°F to +149°F) |
| Working Humidity 1 | 0%~90% (No Condensing) |
| Dimension | 123mm × 88mm × 21mm (4.84″ × 3.46″ × 0.83″) |
| Tamper Alarm | Support |
| Protection Level | IP65 |
| Mounting Method | Wall Mounting with/without Gang Box |
Close
Suprema BioEntry R2 Compact Fingerprint Reader BER2-OD
Specification
| Credential | Biometric | Fingerprint |
| RF Option | BER2-OD: 125kHz EM & 13.56MHz MIFARE, MIFARE Plus, DESFire/EV1, FeliCa, NFC | |
| RF read range* | MIFARE/DESFire/EM/iCLASS: 50 mm, Felica: 30 mm * RF read range will vary depending on the installation environment. | |
| Hardware | LED | Multi-color |
| Sound | Multi-tone Buzzer | |
| Operating temperature | -20°C ~ 50°C | |
| Operating humidity | 0% ~ 80%, non-condensing | |
| Dimension (W x H x D) | 50 mm x 164 mm x 37.5 mm | |
| Weight | Device: 158 g | |
| Bracket: 39 g (Including washer and bolt) | ||
| Certificates | CE, FCC, KC, RoHS, REACH, WEEE | |
| Interface | RS-485 | 1ch Slave |
| Tamper | Supported |
Close
Zkteco SpeedFace-V5L [TD] Face and Palm Recognition Recognition Terminal
| Display | 5-inch Touch Screen |
| Face Capacity | 6,000 |
| Palm Capacity | 3,000 |
| Fingerprint Capacity | 6,000 (Standard); 10,000 (Optional) |
| Transactions | 200,000 |
| Operation System | Linux |
| Standard Functions |
ADMS, T9 Input, DST, Camera, 9-digit User ID, Access Levels, Groups, Holidays, Anti- passback,
Record Query, Tamper Switch Alarm, Multiple Verify Modes. |
| Hardware | 900MHz Dual Core CPU, Memory 512MB RAM / 8G Flash, 2MP WDR Low Light Camera,Adjustable Light Brightness LED |
| Communication | TCP/IP, WiFi (Optional), Wiegand input / output, RS485 |
| Access Control Interface | 3rd Party Electric Lock, Door Sensor, Exit Button, Alarm output, Auxiliary Input |
| Facial Recognition Speed | ≤1s |
| Biometrics Algorithms | ZKFace V5.8 & ZKFinger V10.0 & ZKPalm V12.0 |
| Power Supply | 12V 3A |
| Operating Humidity | 10% – 90% |
| Operating Temperature | 16°C ~ 32°C (60.8°F ~ 89.6°F) |
| Dimensions (W*H*D) | 91.93 * 220 * 22.5 (mm) |
| Supported Softwares | ZKBioAccess |
Reviews
There are no reviews yet.