ZYCOO-4GSM-U50-U100 4 GSM trunk module for SMS/Voice. The 4GSM module has 4 GSM ports for four SIM Cards from any operator and is supported by the CooVox U50 and U100 models in addition to the P appliances. It includes 4 wired antennas for a better reception location./*54745756836*/
ZYCOO-4GSM-U50-U100 4 GSM trunk module for SMS/Voice
The ZYCOO-4GSM-U50-U100 4 GSM trunk module for SMS/Voice IP Phone System for GSM connection. Each port has one LED(Light-Emitting Diodes). Designed with SIM900 for global market, SIM900 is a quad-band GSM engine that works on frequencies GSM 850MHz, EGSM 900MHz, DCS 1800MHz and PCS 1900MHz.
The 4GSM module has 4 GSM ports for four SIM Cards from any operator and is supported by the CooVox U50 and U100 models in addition to the P appliances. It includes 4 wired antennas for a better reception location.
The 2/4 GSM module supports CooVox-U50/ CooVox-U100/Asterisk Appliance P2 IP Phone Systemfor GSM connection. Each port has one LED(Light-Emitting Diodes). Designed with SIM900 for global market, SIM900 is a quad-band GSM engine that works on frequencies GSM 850MHz, EGSM 900MHz, DCS 1800MHz and PCS 1900MHz. Interoperable modules 4FXO, 4FXS, 4BRI, 1PRI, Supported protocols Voice (2G), SMS, Accessibility. Through Asterisk 1.8x
Specifications GSM Modules:
Each port has one LED (Light-Emitting Diodes), which is assembled on the mainboard.
The Red LED indicates port status:
Solid Red = Module loading successful
Blink Red = Channel Ringing
If the LED is off, the GSM module is loading failure.
The Red LED indicates port status:
Solid Red = TE Model
The Green LED indicates port status:
Solid Green = NT Model
If the LED is off, the module is loading failure.
SIM900 Key Features
Based on SIM900 chipset, a quad-band GSM engine, working on GSM 850MHz, EGSM 900MHz, DCS 1800MHz and PCS 1900MHz frequencies, the module can be used worldwide.
Designed with SIM900 for global market, SIM900 is a quad-band GSM engine that works on frequencies GSM 850MHz, EGSM 900MHz, DCS 1800MHz and PCS 1900MHz.
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
Close
Zycoo U20 2FX0 1GSM IP PBX With 2FXO and 1 GSM
| Item | CooVox-U20 | ||
| System Capacity | Concurrent Calls | 10 | |
| Extension Users | 30 | ||
| Voicemail | 21,000 mins (.gsm) | ||
| and | |||
| Recording | |||
| 3000 mins (.wav) | |||
| Hardware Capacity | SDRAM | 128MB DDR2 | |
| Memory (default) | 4GB SD card | ||
| Power Supply | Input | AC 100-240V | |
| Output | DC 12V/1A | ||
| Applicable Module | |||
| Item | CooVox-U20 | CooVox-U50 | |
| FXO-200 (2FXO) | √ | × | |
| FXS-200 (2FXS) | √ | × | |
| FXOS (1FXO+1FXS) | √ | × | |
| 4FXO | × | √ | |
| 4FXS | × | √ | |
| 2FXOS (2FXO+2FXS) | × | √ | |
| 1GSM | √ | × | |
| 2GSM | × | √ | |
| 4GSM | × | √ | |
| 1PRI (E1/T1) | × | √ (Slot1) | |
| 4BRI | × | √ (Slot1) | |
| 1UM (UMTS) | √ | √ | |
| 32EM (Echo Cancellation) | × | √ | |
Close
PANASONIC KX-TE82483SX -3-port analogue CO Line & 8-Port hybrid Extension card
/*54745756836*/
Close
4G LTE indoor CPE Router ZLT P28
VOIP function 2 External antenna Build-in battery USB port 1 LAN interface 2 Voice ports Power transmitting 23 dbm 4G
PANASONIC KX TS500MX
/*54745756836*/
Close
Yealink W80B Wireless Multicell DECT Basestation
What is Multi-Cell DECT simply put, it means that a cordless phone can “roam” between various base stations without losing the call. Yealink’s Multi-Cell DECT solution allows up to 100 handsets to be connected to up to 30 base stations, all seamlessly handing over calls and allowing users to roam as they please. Taking the DECT base station range into account (50m indoors, 300m with a clear line of sight) this provides a massive area of coverage when fully populated! Of course, most businesses will not just deploy phones over a large flat surface, and the Yealink Multi-Cell DECT solution is ideal for bridging the coverage dead spots between multi-level buildings.
Unlike Wi-Fi based cordless phones which are prone to interference and bad user experience with incorrect setup, DECT remains one of the best high voice quality, low interference and secure VoIP communication methods.
Multi-Cell DECT, combined with Yealink’s industry-leading design is also revolutionising the traditional office environment, by bringing DECT to your desktop phone and your boardroom, as a conference phone! As part of the refinements expected later this year, Yealink will allow for your complete office to be connected to its Multi-Cell base solution. This is great news for both installers and end-users, as it means install times are cut down, the requirement for trenching/trunking is significantly reduced, and there’s a cost-saving by not deploying ethernet cables.
Features:
- Seamless handover and roaming
- Up to 100 parallel calls
- Up to 30 base stations
- Up to 100 handsets
- Up to 100 SIP accounts
- Supports W53H and W56H
- PoE support
- Wall mount only
Benefits:
- Move between base stations without losing calls
- High-quality and secure DECT calls
- Works with existing handsets (W53H & W56H)
- Up to 100 handsets
- Easily upgrade your DECT network by replacing only the base station
- 3 Different base station modes for all deployment sizes
Yealink IP Handset with DECT (wireless)
. High-end ID design . Exceptional HD sound with wideband technology . Up to 4 simultaneous voice calls . Up
Fanvil Wireless IP Phone
Fanvil Wireless IP Phone an entry-level WiFi color screen IP Phone. It use 320x240 2.4-inch color screen, and support HD voice, fast ethernet, 4 SIP accounts, Built–in 2.4G WiFi, 6-party conference etc rich functions. It provides the high-quality andconvenient experience for users at an affordable price. Highlights □√ 4 SIP lines, SIP hotspot□√ 1000 local phonebook, caller ID, call hold, call transfer□√ 2.4” main color display□√ HD audio on speakerphone and handset□√ Opus voice: can handle a variety of audio applications, including IP voice,Multiparty conference, etc.□√ Support 6-party local conference□√ Support EHS wireless headset□√ Built-in 2.4GHz WiFi, supporting wireless network connection./*54745756836*/
Close
Yeastar P570 VoIP PBX Phone System
The Yeastar P570 VoIP PBX is an adaptive, professional, reliable PBX phone system for SMEs. It alllows businessses to to have uninterruped communications in at all times in a fully fledged system.
Yeastar P570 Key Features
- Users 300 / 500
- Max Concurrent Calls 60 / 120
- Max Call Centre Agents 300 / 500
- Max FXS Ports 16
- Max BRI Ports 16
- Max GSM/4G Ports 6
- Max E1/T1/J1 Ports 2
- Expandable D30 2
Yeastar P570 – Technical Specifications
General
- Users 300 / 500
- Max Concurrent Calls 60 / 120
- Max Call Center Agents 300 / 500
- Max FXS Ports 16
- Max FXO/BRI Ports 16
- Max GSM/3G/4G Ports 6
- Max E1/T1/J1 Ports 2
- Expandable D30 2
- Transport Protocol UDP, TCP, TLS, SRTP
- Voice Codec G711 (alaw/ulaw), G722, G726, G729A, GSM, Speex, ADPCM, iLBC
- Video Codec H263, H263P, H264, MPEG4
- DTMF In-band, RFC4733, RFC2833, SIP INFO
- NFC Read/Write
- Ethernet interfaces 2 x (10/100/1000 Mbps)
- Hard disk 1 SATA (Up to 2TB)
- USB 1 (up to 2TB)
- Power Supply AC 100-240V 50/60HZ 1.5A max
- Size (L x W x H) (cm) 44 x 25.2 x 4.4
- Weight 2.38 kg
- Form Factor 1U Rack-mount
- Environment – Operation Range: 0°C to 40°C, 32°F to 104°F – Storage Range: -20°C to 65°C, -4°F to 149°F – Humidity: 10-90% non-condensing
Reviews
There are no reviews yet.