4G LTE indoor CPE Router ZLT P28

FPX9102H was developed based on the OpenWRT and Asterisk open-source project. Which is feature riched and easy to install and use. Automatic configuration Power on the IP phone and FPX9102H, Connect the PSTN and internet in FPX9102H correctly. The IP phone can connect the FPX9102H via wireless and get the sip account. You can also connect the IP phone to FPX9102H by manual.

Hardware Features
VoIP SoC		Dual-core MIPS1004k (880MHz)
RAM		256MBytes DDR3 RAM
FLASH		128M Nand Flash
Interface		1 RJ-45 for WAN port (Ethernet 1000 Base-T) 4 RJ-45 for LAN port (Ethernet 1000 Base-T) 2 RJ-11 for FXO port 1 USB 2.0 Host Ports IEEE802.11 b/g/n IEEE802.11 ac 1 Reset button 1 Power Switch 1 Power jack
Power Supply		AC Input : 100-240v, 50-60Hz DC Output: 12V, 1.5A
LED		1 Internet LED for indicating Internet connecting 4 Ethernet LED for indicating Ethernet connecting 1 Power LED for indicting Power connecting 2 Wireless LED for indicting Wireless connecting(2.4G/5G)
Environmental		Operation Temperature: 5~45 Degree C Storage Temperature: -25~85 Degree C Relatively Humidity: 10%~90% No Condensing Shock: Up to 75cm Drop upon package
Software Features
Key Features	Based Asterisk and OpenWRT Full Asterisk PBX Features Dial Plan, BLF, Voice Mail, Meeting room Parking & Paging, Queue, ACD, IVR, etc 50 registered extensions SIP trunk and Skype trunk 2 PSTN Trunks ( FXO ports ) 25 synchronous calls Conference room (G.711): two for 10 persons one for 20 persons Unified Message storage: 3000min of voicemail
Management			Firmware Upgrade Web Management Interface SNTP Time Synchronization Batch Configuration for SIP Terminal
Router		System Status Information and Network Status DDNS Configuration Backup DHCP Server and Client Open VPN QoS Firewall Protection Upload Tool Time Synchronization Software Management File Upload and Download Asterisk Restart Password Reset Web Language change
PBX		Status Information Hardware Configuration Analog Trunk and SIP Trunk Outgoing Calling Rules Incoming Calling Rules Dial Plans Ring Groups Paging&Intercom Call Queues Call Records Music On Hold Voice Menus Time Intervals Password Management Conferencing Voice Mail Voice Mail Groups Asterisk Logs Voice Menu Prompts Call Features Call Detail Records Active Channels Bulk Add File Editor SIP Settings General Preference Settings

Zycoo UC510 IP Office for SOHO All in one Router IP PBX is specially designed as IP Office for SOHOs (Small Office and Home Offices). The new solution offers not only a Wi-Fi router supporting VPN Client/Server, VLAN，external ADSL, … but also a fully featured IP PBX that can host up to 10 extensions with 2 analog ports connected (PSTN line (FXO)/ analog phone (FXS)); and supports Call Forward, Blind/Attendant Transfer and so on. UC510 can be configured and managed through a comprehensive, consolidated web interface significantly reducing time and effort required to deploy the product. The single management interface together with the cost reduction through consolidation of two products makes the UC510 very attractive solution for SOHO market. Hardware Specifications WAN Port 1x 10/100Base-TX Fast Ethernet, Auto MDI/MDIX LAN Port 4x 10/100Base-TX Fast Ethernet, Auto MDI/MDIX Telephony Port UC51011: 1FXS+1FXO (Life-Line) UC51002: 2FXO USB Port 2x USB2.0 Turbo Button Reset/WPS-PBC RAM DDR2 128MB Storage 256MB Onboard Flash Environment Working Temperature: 0 °C ~ 40°C Storage Temperature: -20 °C ~ 55°C Humidity: 5% ~ 95% Non-Condensing